Series MLD- Recessed Down Light

With spacing up to 55 ft in 9 ft ceilings, this recessed down light with a 4” trim is our most efficient emergency luminaire; very effective in long corridors, it is inconspicuous and will blend with general lighting fixtures without affecting the appearance of ceiling layouts

All MOONLITE fixtures have a dual lighting function, for normal ambient lighting as well as emergency lighting. The night lighting option delivers big power savings, or can act as a low-energy booster for conventional ambient lighting fixtures. The Security Lighting option can be controlled by an internal time clock, photocell, or from a building management system.

Recessed 4” trim ring installation in ceilings, with standard back plate and universal mount bars.
High power LEDs and optical lenses produce an optimized elongated pattern along the path of egress.
Models available for surface mount & retrofit.
Three versions available:
BB= Unit equipment with self-contained battery
RE= Remote for connection to Central Battery System
AC= For connection to AC 120/277 emergency
supply.

The most cost- effective emergency lighting possible, with extremely low power consumption and lamp life exceeding 50,000 hrs
Provides 1 Fc average emergency lighting along the path of egress from standard ceiling heights, with spacing of over 50 ft.
Power consumption 8 watts in emergency mode and about 4 watts for night lighting or security mode.
When installed for dual mode operation (emergency and night or security lighting), these units provide tremendous energy savings compared to conventional lighting, up to $.50 per sq ft of lit area. See the Signtex cost comparison.

Lamps are connected in parallel. If one lamp fails, one or more lamps will continue in operation.
Universal 120/277 VAC input for standard battery or AC unit, or 24 VDC input for remote configuration.
Power supply delivers regulated current and voltage to LED lamps at optimum levels to maximize lamp life.
Automatic battery diagnostics available for all battery models.

NOTE: Series MRD/MLS share the same IES file as MLD
(Right click & choose “save as” to download .ies file)